One Source For All Your Replacement Lighting Requirements
One Source For All Your Replacement Lighting Requirements
call 1.800/223.3808
Home / HID / High Pressure Sodium / High Pressure Sodium - Medium Base (E26)

High Pressure Sodium - Medium Base (E26)

Unassigned

Write a Review of This Product
High pressure sodium lamps have a sodium arc tube enclosed in standard glass envelope.  All of these lamps operate on a ballast which must match the lamp in wattage and ANSI type.  All sodium lamps have an ANSI number - the letter S followed by 2 digits - which needs to match the number on the ballast.  Medium base sodium lamps are low wattage lamps ranging from 35 watt to 150 watt and are most often found in smaller exterior lighting fixtures.  To operate a high pressure sodium lighting system at maximum efficiency the bulbs should be changed prior to complete burnout i.e. when the lamp begins cycling or flashing it is time to replace the bulb.  
  
ITEM#DESCRIPTIONQTY. 
  
LU35/Med Bulbrite / 35 Watt / ClearADD TO QUOTE
LU35/Med-E Eiko / 35 Watt / ClearADD TO QUOTE
LU150/M/Diffused Eye / 150 Watt / DiffusedADD TO QUOTE
LU50/Med G.E. / 50 Watt / ClearADD TO QUOTE
LU70/M Higuchi / 70 Watt / ClearADD TO QUOTE
LU100/M Higuchi / 100 Watt / ClearADD TO QUOTE
LU150/M Higuchi / 150 Watt / ClearADD TO QUOTE
LU100/D/Med Philips / 100 Watt / DiffusedADD TO QUOTE
LU50/D/Med Sylvania / 50 Watt / DiffusedADD TO QUOTE
LU70/D/Med Sylvania / 70 Watt / DiffusedADD TO QUOTE
LU150/55/D/Med Sylvania / 150 Watt / DiffusedADD TO QUOTE
LU35/S76/Med Westinghouse / 35 Watt / ClearADD TO QUOTE
LU50/S68/Med Westinghouse / 50 Watt / ClearADD TO QUOTE