One Source For All Your Replacement Lighting Requirements
One Source For All Your Replacement Lighting Requirements
call 1.800/223.3808

Ignitors

Unassigned

Write a Review of This Product
Ignitors for high pressure lamps are basically a large electronic starter which provide an initial burst of current to the high pressure arc tube to initiate lamp operation.  Ignitors are denominated in various wattage increments such as 400W, 1000W and 2000W but they actually will ignite a range of different lamps.  The 400W ignitor for example will initialize lamps from 250 watt to 600 watt and the 1000W ignitor will work with lamps from 700 watts to 1500 watts.  Ignitors have a long service life but they can be damaged by operating high pressure lamps that are past their rated life and require multiple additional current pulses to strike the arc in the lamp.  This situation is even worse if burned out lamps are left in the socket as the ignitor will attempt to strike the lamp many times per second for the entire duration of the tanning session.  When an ignitor actually reaches end of life it often will cause the lamp to burn out simultaneously and this is the reason to avoid abnormal operation with defective or burned out lamps because when a new lamp is placed in the socket the stressed ignitor will fail and immediately burn out the brand new lamp.  Please provide your Kelsun sales representative with the details of your particular tanning unit and we will be pleased to assist you in selecting the optimal ignitor for your application.
  
ITEM#DESCRIPTIONQTY. 
  
Z 1000 Z 1000ADD TO QUOTE
Z 400 Z 400ADD TO QUOTE
Z 400M Z 400M ADD TO QUOTE
Z 400MK Z 400MKADD TO QUOTE
Z 2000S Z 2000SADD TO QUOTE